Pro 6000 Instructions

Basic Functions
To increase the temperature press the up arrow for each degree warmer you would like your house. To decrease the temperature press the down arrow once for each degree colder you would like your house These settings will only temporarily change the temprerature until the next time period begins. If you would like the temperature to be permanent press the "hold" button. Note: If the hold button is pressed the thermostat will no longer follow the programmed schedule. To return to the schedule press the hold button again and "hold" will disappear next to the temperature

Fan Settings
The most common setting is "AUTO" this turns the furnace fan on or off when the system turns on. The "ON" setting leaves the furnace fan on. This can be used for increased circulation or increased air cleaning if your house has an electronic air cleaner

Changing from heating to cooling
Press the button on the far right under the "system" tab. The settings are "Heat" "Cool"

How to program your thermostat
Your new thermostat is already programmed to Energy Star(R) program settings which can save up to 33% on heating/cooling expenses

1: Press the left button under the "Set clock/day/schedule"
2: Use the up and down arrows to select what time it is
3: Press the set day button once the correct time is reached
4: Use the up and down arrows to select what day it is
5: Press the set schedule button
6: Select the time you normally wake up during the week(M-F) and press next
7: Select the temperature you would like the house when you wake up and press next(The setting of 70 degrees is recomended for energy effciency and comfort)
8: Set the time during the week that you normally leave the house(M-F) then press next. If you do not leave the house during the day press the cancel period button
9: We recommend a temperature of 62 while you are away from your home. Press the next button to keep this setting or use the arrows to adjust the temperature when you are not home
10:Select the time when you return home during the day and press next
11:Press next if the heat setting of 70 is desired or adjust the heat setting with the arrows
12:The last setting is for when you go to sleep at night.
13:Set the time you are normally asleep by and press next
14:Adjust the heat setting for when you are sleeping(62 degrees for energy savings) and press next
15:Repeat steps 6-14 to adjust the thermostat for the weekend
16:If you do not leave during the day on the weekend press the cancel period button to have the heat setting set at 70 from the time you wake up until the time you go to sleep
17:After all settings have been set press the "done" button
18:Congratulations!!! You now have a programmed thermostat set to your individual needs that will save you money on heating and cooling costs
19:If you have air conditioning press the button under the system tab and set to "cool" then repeat steps 5-14 after pressing the "set clock/day/schedule"
Note: This thermostat uses Adaptive Intelligent Recovery to learn how long it takes to warm up or cool down your house. Example: If the wake time is set to 6AM the system will turn on before 6AM to adjust the temperature in your house so it is comfortable when you wake up. During this time the thermostat will flash "In Recovery"

Cooling not working?
This thermostat features built in compressor protection. If your air conditioner turns off, the thermostat will wait 3 minutes until it will allow the air conditioner to turn on again. This feature will increase the life of your air conditioner. If protection is on the "Cool On" will be flashing to show it is in protection.